Senco PC2017 Instrucciones de operaciones descargar pdf (Pagina 9)

Senco

®

Gasoline Air Compressor Manual 2004 9

AIR INTAKE FILTER: This ﬁlter

is designed to clean air coming

into the pump. To ensure the

pump continually receives a

clean, cool, dry air supply this

ﬁlter must always be clean and

ventilation opening free from

obstructions. Replace ﬁlter when

necessary.

AIR COMPRESSOR PUMP: To

compress air, the pistons move

up and down in the cylinders.

On the downstroke, air is drawn

in through the air intake valves

while the exhaust valves remain

closed. On the upstroke, air is

compressed, the intake valves

close and compressed air is

forced out through the exhaust

valves, into the discharge line,

through the pilot valve and into

the air tank.

PILOT VALVE: When the toggle

is in the upright position, all air

from the air compressor is vented

through the discharge mufﬂer.

This gives an easy start feature.

For normal operation, the toggle

is in the 90° position.

SAFETY RELIEF VALVE:

This valve is designed to

prevent system failures by

relieving pressure from the

system when the compressed

air reaches a predetermined

level. The valve is preset by

the manufacturer and must

not be modiﬁed in any way.

To verify the valve is working

properly, pull on the ring. Air pres-

sure should escape. When the

ring is released, it will reseat.

AIR TANK DRAIN VALVE:

The drain valve is used to

remove moisture from the

air tank(s) after the air com-

pressor is shut off. NEVER

attempt to open the drain

valve when more than 10

PSI of air pressure is in the

air tank! To open the drain

valve, turn the knob counter-

clockwise.

AIR TANK PRESSURE

GAUGE: The air tank

pressure gauge indicates the

reserve air pressure in the air

tank (s).

PRESSURE REGULATOR:

The air pressure coming from

the air tank is controlled by the

regulator knob. Turn the pres

-

sure regulation knob clockwise

to increase discharge pres-

sure, and counterclockwise

to decrease discharge pres-

sure.

O U T L E T P R E S S U R E

GAUGE: The outlet pressure

gauge indicates the air pres-

sure available at the outlet side

of the regulator. This pressure

is controlled by the regulator

and is always less or equal to

the air tank pressure.

OIL SIGHT GLASS: The oil sight

glass will register the amount of

oil in the pump. Ensure the oil

level in the air compressor pump

is adequate. If low, add SAE-30W

non-detergent oil.

PC2017 FEATURES REVIEW

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios